Home / Products / Videowall Processors / VLX-TC1-C
VLX-TC1-C_Front_Side_Angle VLX-TC1-C_Front VLX-TC1-C_Rear

Click Image to Zoom

Click thumbnail for larger image
VLX-TC1-C_Front_Side_Angle VLX-TC1-C_Front VLX-TC1-C_Rear

VLX-TC1-C

IPBaseT VLX-TCW2HThe VLX-TC1 Series provides one of the most advanced IP Streaming solutions on the market utilizing Aurora’s IPBaseT® technology, which synergizes various IP/AV standards to work together as one. It is the industry’s first 4K UHD transceiver with only 1.5 frame (25ms) latency and visually lossless compression. Using a transmitter (encoder) and receiver (decoder), respectively, used to be the standard – until now. The VLX-TC1 Series can be set up as either one to make installation, inventory, and troubleshooting easier.

Note: The selected network switch needs to support:  1Gbps, Non-blocking IGMP & Jumbo Frame Packets. The raw network cabling as well as the patch cables are as important as the switch. When using copper, CAT5e, 6, or 6a cable is preferred for optimal performance and is important to follow the standard rules for running Ethernet cables. No sharp bends, coiling, putting near power lines, grouping tightly together with other LAN cables, etc. Shielding is not necessary but can be used for noisy environments.

  • 4K visually lossless over 1Gbps network
  • Low 1.5 frame latency
  • 1080p to 4K, 4K to 1080p scaling
  • HDMI® 2.0/HDCP 2.2
  • Secure Content Encryption
  • Unlimited scalability (based on network topology)
  • Videowall with image rotation
  • PoE (Power over Ethernet)
  • Stereo line I/O
  • RS-232 and IR Control Ports
  • Auto sense switching
  • USB 2.0 Host and Device Ports
  • Dante® IP audio option
Technical
Compression 8:1
Latency 1.5 Frames (25ms)
Scaling 1080p to 4K, 4K to 1080p
HDMI Inputs 2 (HDMI 2.0, HDCP2.2)
HDMI Outputs 1 (HDMI 2.0, HDCP2.2)
Audio Analog Stereo Line In/Out (3.5mm TRS)
1G Copper Ethernet RJ-45
LAN RJ-45 10/100/1000M PoE (PSE)
Video Bandwidth 340MHz
Video support Up to 4K2K 4:2:0 @60Hz
Audio support Up to 32 channels & Break-away Capable
RS-232 Up to 115k Baud (3.5mm TRS)
IR Bi-Directional (3.5mm TRS)
USB Connector 1 USB 2.0 Type A, 1 USB 2.0 Type B 2 USB 1.1 Type A (50Mbps)
Expansion Port Dante® Option
Interface IR or Keypad via OSD, Webserver
Mechanical
Housing Black Aluminum Enclosure
Dimensions [L x W x H] 175 x 102 x 27.7mm [6.875" x 4" x 1.09"]
Weight .453kg [1lbs]
Mounting Rack mount vertical, Rack mount horizontal, Under table mount (Included)
Power supply 48V DC (2 pin Euro) or PoE (LAN)
Power consumption 9 Watts
Operation temperature 0~40C [32~104F]
Storage temperature -20~60C [-4~140F]
Relative humidity 20~90% RH [no condensation]